Best Power Tool Parts & Accessories

Grizzly Industrial G0452Z - 6" x 46" Jointer w/Spiral Cutterhead

  • Motor: 1.5 HP, 120V/240V, single-phase, 15A/7.5A, prewired 110V
  • Maximum stock width: 6″
  • Maximum depth of cut: 1/8″
  • Maximum rabbeting capacity: 1/2″
  • Cutterhead: Spiral with indexable carbide inserts
5/5

Shop Fox W1812 Planer Moulder with Stand

  • Item may ship in more than one box and may arrive separately
  • Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 – 18 FPM
  • Precision-ground cast iron infeed and outfeed extension wings
  • Dovetailed way for cutterhead housing with precision gib adjustments
  • Variable speed power feed with chain drive power transfer
  • Pedestal-mounted control switch with variable speed control
5/5

Jet HVBS-712 7"x12" Horizontal/Vertical Bandsaw

  • 9-7/16″ X 10″ Work table in the vertical position
  • RAPID ACTION VISE: Miters to 45°.
  • STORAGE CABINET AND CHIP TRAY: Improved height and width of stand.
  • ADJUSTABLE MATERIAL STOP: For repeatable cuts.
  • CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.
5/5

Jet 321360A BDB-1340A 13-Inch Swing by 40-Inch between Centers 230-Volt 1 Phase Belt Drive Bench

  • 2 HorsePower, 1Ph, 230 Volts Motor
  • 1 3/8 Inches Spindle Hole
  • 13 inches Swing x 40 inches Centers
  • 12 spindle speeds ranging from 60 1240 RPM
  • Shown with Optional stand
5/5

Johnson Level and Tool 40-6529 Electronic Self-Leveling Horizontal and Vertical Rotary Laser Kit

  • Visual and audible alarms when beyond leveling range
  • Height of Instrument/Tilt alarm function ensures product accuracy
  • Laser beam modes that include dot, two adjustable line lengths and two rotational speeds
  • Laser Class llla Power output Less/Equal to 5mW
  • Laser Class Illa, <5mW
5/5

Baileigh 14-Inch Manual Abrasive Chop Saw (AS-350M)

  • 14″ BLADE TURNS AT 4,300 RPM
  • CLEANLY CUT THIN WALL TUBING: Powerful 7.5-hp motor.
  • FAST MATERIAL CHANGES: 6.5” maximum-width vise with a taper lock.
  • FAST MATERIAL CHANGES: 6.5” maximum-width vise with a taper lock.
  • REDUCED VIBRATION AND INCREASED BLADE LIFE: Cast base and head are mounted on a sturdy steel cabinet.
5/5

Baileigh BS-210M Hydraulic Horizontal Band Saw, 110V, 1hp Motor, 3/4" Blade, 6-3/4" Round Capacity

  • 110 Volts power
  • 3/4-inches blade height
  • Variable Speed
  • 6-3/4-inches round capacity
  • Hydraulic decent
5/5

EASY-KLEEN PRESSURE SYSTEMS LTD Commercial 4000 PSI 3.5 GPM Gas Driven Hot Water Pressure Washer

  • The Easy Kleen 4000 PSI Commercial Gasoline Driven Oil Fired Hot Water Pressure Washer is one of our most popular and versatile units. Utilized by a multitude of business for a wide variety of cleaning needs. From a simple oil field application to daily construction and farm use. Our customers continuously comment on the heat and speed of cleaning with these machines. 15 HP gasoline driven engine, efficient, serviceable Commercial duty triplex plunger pump, oil bath crank case, stainless valves, brass manifold, direct drive, thermo pump protector, steel housing Schedule 80 pipe, elliptically wound and stretched, no seam welds, structurally braced to reduce vibration and pipe wear, sealed with a ceramic blanket, stainless steel housing 110/120V Oil fired burners, adjustable thermostat, on/off switch, dependable, serviceable All welded powder coated frame, 12-Gauge bent steel roll cage, lifting bar, 3/4 in. threaded axles welded to the frame, 13 in. pneumatic wheels attached with lock Includes 36 in. gun and wand assembly with quick coupler system, 5 nozzles, downstream chemical injection system, 50 ft. of high-pressure hose 4000 psi at 3.5 GPM CSA/ETL listed
5/5
Email

buybestcarseats@outlook.com

Best Car Seats For Baby
Logo
Enable registration in settings - general